Striplight 25 Ultra-Bright White LED Light Strips DC- Striplytes
The Acolyte Striplytes are rugged and durable for both indoor and outdoor use. They can be bent at a 35 degree angle for
mounting flexibility and light angle distribution. The striplytes can be wired together to make one continuous strip of
light and can be controlled by a single switch or controller.
The Striplytes are great for back lighting, accent light under counters and cabinets, cove lighting, shelf and cabinet
interior lighting, or edge lighting. You can also install our striplytes in boats, planes, semi-tractors, as step lights on
decks, in display counters, kiosks, jewelry cases, bars, clubs, hotels, patio lighting, signage or anything else your
imagination can conjure up.
StripLytes are easy to install! Use double sided self adhesive tapes to secure down to any surface. (not included)
The Striplytes consume very low wattages and are always "Cool to the Touch"!.
These Industrial Grade StripLytes are the highest quality on the market made with heat sinked quad pin LEDs and coated in
a high heat poly resin. The quad pin type LED stays lit longer and performs cooler due to the four pins acting as a heat sink.
Only the DC StripLyte version can be cut down in size generally at every 3rd LED (about 1 1/2
inch intervals). If you are unsure where to cut, please contact us!
Friendly advice: When installing fixtures, arrays, strips, clusters or any LED product which has a total of 60 or more
LEDs, it is always wise to use a dimmer even if you will not use the dimming function. The dimmer contains a PWM/pulse width
modulation component which will allow maximum life of the LEDs.
This unit is 12 volt DC, DO NOT ATTEMPT TO PLUG INTO 110 VOLT AC!!!
| How can I tell the difference between AC & DC striplights? |
| AC version has a 2 prong plug that fits into a standard AC outlet receptacle. |
| DC version has no plug! Just a wire with 2 bare ends! |
| Striplyte specs: |
| Can be bent at 35 degree angle for mounting. |
| Even light distribution. |
| Consume low wattage and cool to the touch. |
| Electrical Characteristics: |
| Input Voltage Source Regulated: 12 volt DC |
| Input Voltage: 12 volt DC! |
| Operating Temperature: -10C to +50C |
| Luminous Intensity: 16.2 CD / 35 watts / 510 Lumen per 12" length. |
Datasheet
